(Pulse para versión en Español)
Quartz Infrared (IR) Lamps for all industrial and scientific applications, including flexo, silkscreen, graphic arts, and garment printing, autobody, paint and paper drying, food warming, adhesive bonding, plastic forming, blowmolding, inkjet drying, woodworking and other applications. We always meet or exceed original specifications, while saving you money. Plus you get:
Click to order lamps now!
Download a PDF Format Line Card on Specialty Lamps
|Twin Tube Infrared Emitters (IR Lamps)|
Twin Tube IR lamps are made by fusing two single
tubes together for higher output and greater mechanical stability. They are
supplied in short wave versions characterized by a flat, pinched seal at the end
(like the one on the left), and medium wave, where the ceramic end is held onto the end by the filament
(like the one on the right). Both are available in a wide variety of
configurations, where either one or both channels are heated, with the two wired
in series or parallel, and with split filaments, to allow heating of the entire
width, or just a part of it.
Twin tube lamps typically have a gold reflector to direct the heat towards the substrate. To see the different configurations available and to help us quote the twin tube lamps you need, please download and complete the twin-tube specifier sheet.
We supply twin-tube lamps for equipment
by these and other manufacturers:
Applied Materials Air Motion Billco BLV Cosmatic 2415, 09751713 Dandy 31804 Drystar Eltosch 0142304, 0142394, 12500141, 12500229 Grafix Grafix/Drystar Heidelberg (CD 102, CD102, SM 102, SM102, SM 74, SM74) Heraeus IST KBA Lamp Tech Pillar Siapi 31840 Sigloch S017022 Techno Trans Technotrans
|Short Wave Infrared (IR) Lamps|
Short wave lamps are characterized by short warm-up times and long life. They are available in a wide variety of voltages, wattages, end caps, either in clear or transluscent quartz, and with or without a reflector. They emit light primarily between 780 - 1400nm.
|Rapid Start Medium Wave Infrared (IR) Lamps|
Fast response (Rapid start) medium wave IR lamps proivde the fast start times of short wave lamps, with the wave length of medium wave lamps. They do not run as hot as equivalent short wave lamps, but they are better at curing inks used for textile printing, since these inks absorb medium wave light better than short wave.
|Medium Wave Infrared (IR) Lamps|
Medium wave IR lamps emit IR in the range from 1400 - 3000nm. They are highly efficient, but require longer times to reach full power than short wave lamps.
We supply single tube lamps for equipment
by these and other manufacturers:
AAA Press AB Dick Accutron Adast Airtech American M and M Amjo Anatol Anderson Thermal Applied Materilas APW Wyott Aradiant ASB Nissei Autographic Services AWT Baldwin Belleco BGK Finishing Systems BLV Brown Manufacturing Calmat/MHM Cayenne Cecilware Cefla CEM Challenger ? Cogent Technologies Comco Dayton DeVries DRI Inc. Dr. Fischer Electronic Systems ESS/Electro Sprayer Systems/Accutron EYE/Iwasaki Fannon Fostoria Fuchs DeVries GE HalCon Hart Hatco Heidelberg Heraeus Herbert Hobart Holman / Star Infratech Inline Technologies IRAM Interchange IRAM IVT Kirk-Rudy Komori Kosme Krones Lawson M&R Manhasset Machinery Mark Andy Maxxys Merco Midlan Midland Mitsubishi MMC MMT Nissei Nordson Oxy Dry OxyDry Oxy Dri OxyDri Philips Perry Manufacturing Philips Pierry Manufacturing Precision Control Systems Prime Heat Systems Progressive Radiation Systems Ray Paul Red Chilli Real Performance Machinery Research Inc. Royse RPM Ryobi Samco International Siapi Siat Sipa Sidel Soneko SPE Spectral Star Sylvania Tempco Ushio Vollrath Vulcan / Hart Workhorse
For quotes on the lamps you use, click the 'Contact Us' link at the top of the page to send us an e-mail, or call toll-free: (800)-222-0325 from 9:00AM to 5:00PM, Monday - Friday (Eastern Standard Time).拉斯维加斯网址大全